RO3010 2-Layer 0.127mm PCB – High-Dk Ceramic-Filled PTFE Substrate with ENIG for RF & Automotive Radar

1.Introduction of RO3010

Rogers RO3010 advanced circuit materials are ceramic-filled PTFE composites that offer a higher dielectric constant with excellent stability. They are competitively priced products with exceptional mechanical and electrical stability. This stability simplifies the design of broadband components and allows the materials to be used in a wide range of applications over a very broad range of frequencies. This material's characteristics make RO3010 laminates excellent for circuit miniaturization.

2.Key Features

Dielectric constant of 10.2 ± 0.30 at 10 GHz / 23°C
Dissipation factor of 0.0022 at 10 GHz / 23°C
Low Coefficient of Thermal Expansion (-55 to 288°C):
X: 13 ppm/°C, Y: 11 ppm/°C, Z: 16 ppm/°C
Thermal decomposition temperature Td > 500°C
Thermal Conductivity: 0.95 W/mK
Moisture Absorption: 0.05%
Operating Temperature Range: -40°C to +85°C

3.Benefits

Material exhibits dimensional stability with expansion coefficient matched to copper
Economical laminate pricing for volume manufacturing process
ISO 9001 Certified
Suitable for use with multi-layer board designs

4.PCB Construction Details

5.PCB Stackup (2-Layer Rigid Structure)

Copper_layer_1 - 35 μm
Rogers RO3010 - 0.127 mm (5mil)
Copper_layer_2 - 35 μm

6.PCB Statistics:

Components: 1
Total Pads: 4
Thru Hole Pads: 2
Top SMT Pads: 2
Bottom SMT Pads: 0
Vias: 4
Nets: 2

7.Typical Applications

Automotive radar applications
Global positioning satellite antennas
Cellular telecommunications systems – power amplifiers and antennas
Patch antenna for wireless communications
Direct broadcast satellites
Datalink on cable systems
Remote meter readers
Power backplanes

8.Quality Assurance

Artwork Format: Gerber RS-274-X
Accepted Standard: IPC-Class-2
Availability: Worldwide